Putty wetting and dispersing additive RF-V966

时间：2016-10-11来源：阅读：2367

Wetting and dispersing agent with a putty
RF-V966
化学名称：原子灰专用助剂 Chemical Name: Putty special additives
RF-V966是本公司生产的一种抑泡型润湿分散剂，能有效分散各种填料碳酸钙，原子灰，各种有机无机颜料。 RF-V966 is the company of a suppression foam wetting dispersant, can spread a variety of calcium carbonate fillers, putty, various organic and inorganic pigments. 主要应用于冷固化聚酯树脂及树脂添加填充料的混合体系中，能有效降低树脂和填充料的表面张力。 Cold-curing polyester resins are mainly used to add filler and resin mixture system, can effectively reduce the resin and filler surface tension. 在抑制体系起泡的同时，具有优异的润湿及分散作用。 Suppression system in the bubble at the same time, has excellent wetting and dispersion.
物化特性： Physical and chemical properties:

　

型号 Model
密 度 Density
20℃ 20 ℃
折射率 Index of refraction
粘 度 Viscosity
（25℃） cp (25 ℃) cp
cp cp
活性物 Actives
% %
PH 值 PH value
1%水溶液 1% aqueous solution
外 观 Appearance
RF-V966 RF-V966
1.048 1.048
1.450 1.450
250 250
100 100
6±0.5 6 ± 0.5
淡黄色 Yellow
　

以上数据并不代表所售产品的规格 The above figures do not represent the specifications of products sold
特性及优点：在不饱和聚酯树脂和填充料的混合过程中，由于搅拌和分散以及振动原因，必然会产生对成品质量有害的气泡。 Characteristics and advantages: in unsaturated polyester resin and filler in the mixing process, mixing and dispersion as well as vibration, the quality of the finished product would have a harmful air bubbles. 加入RF-V966通过降低树脂和填充料之间的界面张力，增加了空气的逃逸速度，最终使产品中空隙很低而达到理想的消泡、抑泡效果。 RF-V966 added resin and filler by reducing the interfacial tension between the increase of the air escape velocity, and finally to the product to achieve the desired gap is very low foaming, defoaming effect.
使用方法：RF-V966加入树脂中搅拌均匀即可，在有填料的情况下，建议最好使用真空搅拌设备。 Usage: RF-V966 adding the resin can be mixed evenly, in a packing case, it would be best to use vacuum mixing equipment.
推荐用量：按树脂量的0.1%～1%。 Recommended dosage: 0.1% by volume of resin to 1%.
适用范围：加有填充料的层积体系中，如人造大理石、PVC型材或管材、卫生洁具、原子灰等方面，主要适用于压敏胶、水基胶等粘合剂体系。 Scope: Add a layer of filler volume system, such as the artificial marble, PVC profiles or pipes, sanitary ware, putty, etc., mainly used in pressure-sensitive adhesive, water-based glue and other adhesive systems.
包装规格：50公斤涂塑桶和200公斤涂塑桶。 Packing: 50 kg and 200 kg plastic barrels plastic barrels.
开桶后，需重新密闭贮存，防止水份渗入或尘粒。 The barrel is open, to be re-sealed storage, to prevent water infiltration or dust particles.
  • 上一篇：Water-based colorant dispersant RF-1029
  • 下一篇：Non-ionic wetting agent RF-1011